Ladle Shrouds, with a standard oxidation protection liner at the CNT area, are designed to function without pre-heating. This cold-start functionality is guaranteed by a special anti-spalling liner. If needed, then slagline protection can be provided. There is a range of main body material choice depending on the steel composition and desired length of casting sequence. Nitrogen pick-up can be reduced by argon protection, which is provided through a metallic can system.
Ladle Shroud
Against oxygen lancing and other damage to assure excellent collector nozzle fit.
Tempseal Gasket
Provide good connection between collector nozzle and Ladle Shroud.
Body material
Alumina graphite material ensures high mechanical strength.
Y-shape design
And Metallic can Re-Enforcement with build-in Argon Management. Matching the angle of the manipulator, the metallic can will enhance mechanical strength.
